SCREWS & BITS · Precision Fasteners

Screws & Bits|Insert / precision / appearance screws and bits

YF Zhichengjia screws and bits source factory: TORX®/TORX PLUS® licensed insert screws, precision screws, M0.6 micro precision screws, appearance screws, super screws, ZT68 high-strength aluminum bolts, shoulder screws, tri-lobular thread-forming screws and matching bits — micron-level tolerance control, rapid sampling and volume production from your drawings.

10member series
239models listed
OEM/ODMsource factory
ISO 9001custom support
Screws & Bits - YF Zhichengjia
Core advantages

Core advantages

Licensed Drive Systems

TORX® / TORX PLUS® licensed recesses in volume production, including IP 5IP-30IP

213+ Stock Sizes

185 countersunk + 28 special-shape standard sizes, fast delivery on common specs

Grade 12.9 High Strength

Grade 12.9 alloy steel / stainless options, stable torque, wear and fatigue resi

Build-to-Print Specials

Inner-outer thread inserts, LH/RH double-end screws and more, rapid sampling fro

Automotive-Grade Quality

IATF 16949 quality system, dimensional inspection and torque test reports with e

Rapid Sampling Response

Fast engineering-sample turnaround to keep tooling projects on the lowest total

All models

Screws & Bits · All models

239 model pages with specifications and drawings — click any model to open its detail page

Product Center(217)

Product Center(13)

Product Center(1)

Product Center(2)

/straightness-bolts/(1)

Product Center(5)

Selection guide

Selection guide

1. Assess by length-to-diameter ratio

The larger the length-to-diameter ratio, the harder straightness is to control. Provide shank diameter × length and straightness requirements; we will

2. Straightness callout

Specify the full-length straightness tolerance and measurement datum on the drawing to avoid acceptance disputes.

3. Material and strength

Select the quenched-and-tempered alloy steel grade by load; weight consistency must be controlled in applications with high dynamic-balancing requirem

4. Assembly advice

Use guiding fixtures when assembling slender bolts; avoid hammering them in, which causes bending.

Typical applications

Typical applications

CNC Insert Clamping

Turning / milling insert clamping, impact and vibration resistant, fast insert c

Tool Disk & Holder Assembly

High-precision locking and positioning of tool disks and holders

Modular Tooling Systems

Inner-outer thread inserts simplify compound tool structures and save space

Precision Opposed Locking

LH/RH double-end screws lock in both directions — no lock washers needed

Spring Positioning & Limiting

Ball plungers provide flexible positioning for tools and fixtures

Molds & Fixtures

Grade 12.9 high-strength locking for heavy-duty cutting conditions

FAQ

FAQ

Q1Is YF Zhichengjia a licensed TORX® / TORX PLUS® manufacturer?

Yes. YF Zhichengjia is a licensed TORX® / TORX PLUS® insert screw manufacturer; recess machining accuracy follows the license standards, and material certificates, full-dimensional inspection and torque test reports are

Q2What head angles and drive systems do countersunk insert screws come in?

Countersunk insert screws are mainly 55°/60° head angle, with special angles of 25°–90° available on request. Drive systems cover TORX PLUS® (5IP–30IP), TORX® (T6–T30) and hex socket, in thread sizes M1.6–M8 — 185 standa

Q3What is the difference between TORX PLUS® and TORX®, and which should I choose?

TORX® is a 15° drive-angle torx recess; TORX PLUS® uses a 0° drive-angle elliptical lobed profile with a larger bit contact area — higher torque in the same installation space, less recess wear and longer bit life. Choos

Q4What materials and strength grades are commonly used?

Standard is grade 12.9 alloy steel (black oxide / nickel plating and other finishes available); stainless steel and corrosion-resistant solutions are offered as needed. Specials can be customized in titanium, aluminum an

Q5Can special-shape insert screws be made to drawing?

Yes. Inner-outer thread inserts, LH/RH double-end screws, ball plungers and extended cylindrical heads can all be made to drawing or sample, with rapid engineering sampling and continuous process optimization.

Q6Why is the TORX® drive so common for insert clamping screws?

Insert clamping means tight space, high torque and frequent insert changes. TORX® / TORX PLUS® recesses distribute radial force evenly, avoiding slip damage to the insert; combined with grade 12.9 material, clamping forc

Need the full catalog or custom clinch and rivet fasteners to drawing?

Send specifications, drawings or application details for selection advice, test reports and a fast quote — direct to our sales lead.

Tel: 13560730094
WeChat QR Code
CNENDEESJAPTRU