Electronics & Special Parts|SMT / UQD / special fasteners
YF Zhichengjia electronics and special fastener factory: SMT nuts and screws on tape-and-reel, UQD quick-connect liquid-cooling fittings, PCB high-current terminals, rod-end bearings and special bolts (flange / connecting rod / shoulder) — dedicated solutions for electronics assembly and special duty.
Core advantages
Pick-and-place ready (tape and reel)
Standard tape and reel, stable vacuum-nozzle pickup
Reflow resistant
Structure withstands furnace temperature without distortion or failure
High-current terminals
PCB power connections with high current capacity
Accurate positioning
Pad location and anti-shift design for placement accuracy
Less labour, lower cost
Assembled on the SMT line, removing downstream fastening
Consistent quality
100% dimensional and coplanarity inspection for high yield
Product series
Spacer & Standoff Custom Solutions for PCB
Electronics & Special PartsMetal spacer and standoff solutions: hex, round and stackable standoffs, PCB welded spacer
View →Product Center
Electronics & Special PartsUQD quick disconnects and blind-mate connectors with high flow, low pressure drop and drip
View →Rod-end bearings
Electronics & Special PartsThe rod-end bearing uses a high-strength forged steel body with a self-lubricating bushing
View →PCB high-current terminal
Electronics & Special PartsPCB high-current terminals are designed for high-current scenarios and soldered onto the P
View →Electronics & Special Parts · All models
14 model pages with specifications and drawings — click any model to open its detail page
Spacer & Standoff Custom Solutions for P(8)
- PCB High-Current Terminal 1
- PCB high-current terminal
- PCB Solder Standoff
- SMT reflow nut
- Small SMT PCBs
- SMT Welding Studs
- SMT spacer block
- SMT nut
Product Center(1)
Product Center(5)
Selection guide
Pick-and-place ready (tape and reel)
Standard tape and reel, stable vacuum-nozzle pickup
Reflow resistant
Structure withstands furnace temperature without distortion or failure
High-current terminals
PCB power connections with high current capacity
Typical applications
PCB assembly
On-board device fastening and interlayer joints
Power modules
High-current terminals and power-board connections
Server mainboards
Multi-layer board stacking and fixing
Automotive electronics
Board-level joints in vehicle controllers
Energy-storage BMS
BMS sensing boards and power terminals
Industrial control boards
Structural fixing on control cards
FAQ
Q1How are SMT fasteners fed?
On standard tape and reel that loads directly into the pick-and-place feeder, picked by vacuum nozzle and produced on the same line as other SMD components.
Q2Can they survive reflow?
They are designed for lead-free reflow peak profiles without distortion or plating failure.
Q3How much current can the terminals carry?
Current capacity depends on terminal cross-section and pad design; current test data can be provided and selection follows the loop current.
Q4What fastening torque do weld studs take?
It varies by size: for M2–M4 studs it depends on size and welding conditions, and we supply measured recommended torque values by part number.
Q5Which standoff heights are available?
Common heights are in stock; non-standard heights and outlines can be customized.
Q6Is tray packaging available?
Yes — besides tape and reel we offer trays and bulk packaging to suit the line.
Need the full catalog or custom clinch and rivet fasteners to drawing?
Send specifications, drawings or application details for selection advice, test reports and a fast quote — direct to our sales lead.
