Clinch and Rivet Fastener Manufacturer|Clinch / Blind Rivet — Source Factory
YF ZCJ riveting fastener source factory: clinch nuts, clinch screws, clinch studs, blind-rivet studs, sealed rivet nuts, grounding clinch studs and through rivets — 15 products that give sheet-metal and cabinet panels a high-strength threaded or grounding joint without welding, set in one press or pull operation.
Why Choose YF ZCJ Clinch and Rivet Fasteners
No welding, high efficiency
Press or pull in one step — no welding and no tapping
Sheet-metal friendly
Reliable setting in panels from 0.5 mm, flat on the reverse face
High strength
Strong torque and pull-out resistance after setting, no loosening
Sealed versions
Sealed rivet nuts combine thread and water protection
Grounding versions
Grounding clinch studs maintain electrical continuity across panels
Full range
Clinch, blind rivet and through types with knurl and thickness matched
Clinch and Rivet Product Series
Clinch series
Nuts / screws / studsS and CLS clinch parts, standard for cabinet sheet metal
View products ↓Blind rivet series
Rivet studsSingle-side installation, even in closed cavities
View products ↓Sealed riveting parts
Water-tight jointsSealed rivet nuts and pre-applied adhesive sealed rivets
View products ↓Grounding and through
Electrical continuity / through-holeGrounding clinch studs and through countersunk rivets
View products ↓Clinch and Rivet Products (12 models)
YF Zhichengjia Pull-Through Rivets (PT Rivets)
YF Zhichengjia Pull-Through Rivets (PT Rivets) Also known as: Countersunk Pull-Through Blind Rivets, Flush-Flush Blind Rivets. Classification: Engineering-grade ...
Details
Type FT-9 Flush Pull-through Rivet
Type FT-9 Flush Pull-through Rivet features a true zero-protrusion head (≤0.05mm surface deviation) that self-aligns during pull riveting to achieve flush mounting on ...
Details
1.2mm Ultra-Thin Self-Clinching Nut
1.2mm Ultra-Thin Self-Clinching Nuts are custom-engineered for ultra-slim sheet metal. Made from hardened alloy steel, they achieve powerful pull-out and torque ...
Details
Self-Clinching Grounding Standoff
The Grounding Self-Clinching Standoff is designed to be pressed into sheet metal to provide a reliable, high-performance grounding connection. It features low contact ...
Details
Grounding Self-Clinching Stud
Grounding Self-Clinching Stud engineered with optimized knurled serrations that cold-flow into sheet metal to create a permanent, low-resistance electrical ...
Details
Self-Clinching Nut
Self-Clinching Nut engineered with precision knurled serrations that cold-flow into pre-punched sheet metal, creating a permanent, high-torque self-locking connection ...
Details
Type 69 Pre-applied Sealant Sealing Blind Rivet
The Series 69 Sealing Rivet integrates advanced pre-applied sealant technology. Upon installation via standard riveting, the specialized adhesive layer cures to form a ...
Details
Ultra-Thin Anti-Loosening Self-Clinching Nut
Ultra-Thin Self-Clinching Nuts are specifically developed for extremely thin sheet metal, utilizing a precision clinching process to achieve a high-strength permanent ...
Details
Blind Rivet Stud
Self-Clinching Standoffs / Rivet Studs are manufactured using high-strength precision cold-heading processes, designed to provide both sheet metal connection and ...
Details
Self-Clinching Stud
Manufactured from high-hardness carbon steel or stainless steel through precision cold-heading, these studs feature a unique clinching ring and displacement groove ...
Details
Pre-applied Adhesive Sealing Blind Rivet Stud
Manufactured from high-quality low-carbon steel or stainless steel, the base is integrated with a precision pre-applied sealant process. When clinched into sheet metal, ...
Details
Type 69 Pre-applied Sealant Sealing Blind Rivet
Type 69 Pre-applied Sealant Sealing Blind Rivet delivers IP68-rated waterproofing and permanent anti-vibration locking via a UV-cured anaerobic adhesive layer that ...
DetailsClinch and Rivet Selection Guide
1. By sheet thickness
Clinch parts must match the panel thickness range, since the knurl embeds into it; for very thin sheets choose ultra-thin clinch types and for closed cavities choose blind rivet studs.
2. By installation method
With a press or punch choose the clinch series; where only one side is accessible (tubes, box interiors) choose blind-rivet studs.
3. By function
For a thread choose nuts or studs, for grounding choose grounding clinch studs, for sealing choose sealed versions.
4. By sheet material
Aluminium, cold-rolled and stainless sheets need different knurl forms and hardness, and hard sheets need matched prepunched hole sizes.
5. Hole size
Clinch and blind rivet parts are sensitive to prepunched hole tolerance — request the recommended hole table by part number.
Typical Applications
Cabinets and enclosures
Threaded joints in server and control cabinets
New energy enclosures
Threaded and grounding joints in battery-pack sheet metal
Telecom equipment
Base-station cabinets and shielded enclosures
Automotive sheet metal
Body and chassis panel joints
Power distribution
Busbar grounding and component mounting in switchgear
Hardware products
Sheet joints in appliances and stainless products
Clinch and Rivet FAQ
Q1Clinch or blind rivet — how do I choose?
If both sides are accessible and a press is available, choose clinch (stronger and cheaper); if only one side is accessible or the cavity is closed, choose blind-rivet studs.
Q2How much torque can a clinch joint take?
Strength depends on sheet thickness, material and knurl match; for typical cabinet work torsional performance is ample, and test data can be supplied for a given load.
Q3Is grounding resistance reliable?
Grounding clinch studs create electrical continuity through metal-to-metal knurl contact with stable resistance, and are widely used in cabinet grounding systems.
Q4Can stainless sheet be clinched?
Yes, with a knurl form and hardness suited to stainless and slightly different prepunched hole sizes; the matching parameters are available.
Q5How well do sealed rivet nuts seal?
They form a face seal as they are set, combining a threaded joint with water protection — suited to outdoor sheet-metal equipment.
Q6Do you support custom parts?
Yes — special lengths, head styles and combined structures can be made to drawing with fast sampling.
Need the full catalog or custom clinch and rivet fasteners to drawing?
Send specifications, drawings or application details for selection advice, test reports and a fast quote — direct to our sales lead.
