Super Screws Product Manual
Super screws are board-to-board fasteners integrating a torx socket head with an external threaded stud: a single part completes multi-layer PCB-to-PCB and PCB-to-sheet-metal connections. Regular 1.2/1.4mm male-female thread specs, with tape-and-reel packaging, CCD sorting and automated assembly support; custom-made to drawing.

Product Overview
Structural Features
- One-piece structure: socket and stud are formed in one body, so there is no risk of assembled components loosening, and assembly needs only one station;
- Torx socket: torque is distributed evenly across the torx lobes, so powered drivers are less likely to slip and cosmetic surfaces are not damaged;
- Threaded-end connection: mates with internal threads formed by SMT soldering on the PCB (such as tin-plated copper nuts / small soldered boards), and can also be driven directly into tapped holes in sheet metal.
PCB Connection System
- SMT nuts (tin-plated copper nuts / small boards): soldered onto the PCB to form internal-thread connections, also usable as spacers, with tape-and-reel packaging support;
- Spacer blocks: SMT-mountable spacer blocks and small boards to meet board stacking and space requirements;
- High-current terminals: in high-current applications they connect PCBs conductively while forming a reliable threaded connection; internal and external threads can be pre-coated with thread-locking adhesive;
- Super screws: for multi-layer PCB-to-PCB connection and PCB-to-sheet-metal connection, supplied in SMT tape-and-reel packaging, compatible with automated lines at the tens-of-millions scale.
Applications
- Multi-layer PCB-to-PCB connection: boards are aligned and fastened to each other with super screws, replacing the conventional multi-screw + nut solution;
- PCB-to-sheet-metal connection: detachable fastened joints between PCB assemblies and chassis sheet metal;
- Spacing and support: thread length defines the standoff height, custom-made to drawing.
Selection Parameters (Custom to Drawing)
| Parameter | Description |
|---|---|
| Thread spec | Nominal diameter and pitch of the external threaded stud; PCB applications commonly use 1.2 / 1.4mm male-female thread specs, with non-standard sizes custom to drawing |
| Socket spec | Torx socket across-flats / across-corners, matched to the assembly driver bit |
| Overall length and steps | Socket height and thread length determined by the board-to-board spacing |
| Material | Selected by strength and conductivity requirements; pre-applied thread locker optional |
| Surface finish | Nickel plating / tin plating, etc., balancing conductivity and corrosion resistance |
| Packaging | Bulk or tape-and-reel, compatible with automatic driving and SMT placement lines |
Supporting Process Capabilities
- Tape-and-reel packaging: packaged to automatic feeder requirements, compatible with automated lines at the tens-of-millions scale, reducing line feeding takt;
- CCD vision sorting: full optical inspection of appearance and dimensions before shipment, reducing defects entering the line;
- Pre-applied thread locker: internal and external threads can be pre-coated, balancing conductivity and loosening resistance (same as the PCB application solutions);
- Testing capability: SMT solderability, salt spray, coating thickness and other tests, with ISO9001/14001/45001/QC080000 systems in operation.
Industry Applications
FAQ
Q1Are there regular specs for super screws?
Consumer-electronics PCB applications commonly use 1.2mm / 1.4mm male-female thread specs; other thread specs, overall lengths and step dimensions are custom-made to drawing.
Q2How is a threaded connection formed with the PCB?
Tin-plated copper nuts or small boards can be SMT-soldered onto the PCB to form internal threads, which mate with the threaded end of the super screw; it can also be driven directly into a tapped hole in sheet metal for a detachable PCB-to-sheet-metal connection.
Q3Is tape-and-reel packaging supported?
Both bulk and tape-and-reel packaging are supported, compatible with SMT placement and automatic driving lines; CCD optical sorting is available before shipment.
Q4Can pre-applied thread locking be done?
Yes. Internal and external threads can be pre-coated with thread-locking adhesive, balancing conductivity and loosening resistance, and shared with the company's PCB application solutions.
Q5What are the prototyping and volume lead times?
Small-batch fast samples can be arranged in as fast as 1 day; volume production is scheduled after evaluation of quantity and process.
Summary
Need super screw selection support?
Provide a drawing or your joining requirements (board spacing, thread spec, packaging method); selection advice and a quote within 1 working day; small-batch samples arranged in as fast as 1 day.
