Direct Assembly Micro fastening for ultra-thin panels
0.6 mm CM Phillips Ultra-Thin Ultra-Short Large-Head Micro Screw
Product photos
Actual photos, not renders
Illustration note
The image shows an actual part of this specification; appearance differs with surface treatment and head style, and the delivered part prevails.
Images are for appearance and structure reference; dimensions and tolerances are subject to the specifications and the applicable standards on this page.
Product description
Compiled from the existing technical description of this product on this site
The 0.6mm CM Phillips ultra-thin ultra-short large-head micro screw uses its 0.6mm ultra-thin large head to add contact area in tight spaces and prevent thin panels from being pulled through. The Phillips drive, combined with an extremely short thread-body process, still gives stable thread engagement, keeping height and volume to a minimum while maintaining fastening strength.
Specifications
The parameters listed on this page are subject to final inspection and the applicable standards; items not listed follow the customer drawing or the order agreement and are not committed by default.
| Specification | 0.6mm |
|---|---|
| Material | High-strength alloy steel |
| Process | Cold heading |
| Drive | Phillips |
| Surface treatment | Black oxide / zinc plated (optional) |
| Standard | Per customer drawing / corporate standard; thread: GB/T 196, GB/T 197 (ISO 965-1) 6g; Phillips drive per GB/T 818 (ISO 7045) |
| Typical application | Micro fastening for ultra-thin panels |
Spec lookup
Filter directly among the 13 models in this series by your operating conditions - pure front-end filtering, no redirects, no URL changes
Filter results are based on the specification fields published on each model page and are for preliminary screening only; the final selection must be confirmed in light of the actual load, plate thickness and assembly process.
Drawings & customization
No public catalogue is available for this series; drawing-based requests are handled per project.
Made to drawing / sample replication
A 2D drawing or a physical sample is enough for evaluation; once confirmed, we issue drawings, build samples and obtain first-article approval before volume production. Drawings and project information are handled under confidentiality requirements.
Manufacturing process
The usual process route for this product family; actual operations follow the drawing and order requirements.
- Cold headingMicro head and shank forming
- Thread rollingMicro thread machining
- Heat treatmentStrength and toughness adjustment
- Surface treatmentNickel plated / zinc plated / black oxide
- Optical sorting100% inspection of dimensions and appearance
Capacity & delivery
Taken from the company's published capacity and certification information; no unverified claims are included.
FAQ
Material, standards, surface treatment and installation points for this model; the data comes from the specification table on this page and from the national standards cited in the answers.
Q1What material is the 0.6mm CM Phillips Ultra-Thin Ultra-Short Large-Head Micro Screw made of, and what strength level does it achieve?
Marked in the specification table on this page: material is high-strength alloy steel. Material certificates and mechanical property test reports can be supplied with the goods; batch acceptance follows the data above.
Q2What are the head type, drive and structure of the 0.6mm CM Phillips Ultra-Thin Ultra-Short Large-Head Micro Screw?
Drive specified in this page's specification table: Phillips. Structural details are subject to the drawing.
Q3What manufacturing process is used for the 0.6mm CM Phillips Ultra-Thin Ultra-Short Large-Head Micro Screw?
The specification table on this page states the process as cold heading. The process route follows drawing and order requirements; first-article approval is provided before volume production.
Q4What are the main features of the 0.6mm CM Phillips Ultra-Thin Ultra-Short Large-Head Micro Screw?
Features listed in this page's product description: 0.6mm ultra-thin large head to enlarge the contact area and prevent board pull-through; extremely short thread body for ultra-thin structures; Phillips drive that can be tightened with common tools; micro-diameter cold heading with full, consistent threads.
Q5What does the 6g thread tolerance of the 0.6mm CM Phillips Ultra-Thin Ultra-Short Large-Head Micro Screw mean?
6g is the standard tolerance class for external threads (GB/T 197 / ISO 965-1). It defines the manufacturing tolerance range for the pitch diameter and major diameter, balancing smooth engagement against manufacturing economy; the mating internal thread is usually 6H. All threads in this series are inspected to 6g. (Applies to model "0.6mm CM Phillips ultra-thin ultra-short large-head micro screw".)
Related models
Alternative sizes in the same series and cross-series fasteners commonly used together
Direct Assembly
0.8mm CD Texture Ultra-Thin Head Micro Screws
A 0.6 mm ultra-low head profile greatly reduces the assembly space; a precision serrated structure is integrated under the head.
Direct Assembly
0.8mm CD texture ultra-thin head micro screw
0.8mm ultra-thin head design minimizes external protrusion and perfectly fits extremely thin and light structures. The top of the head features precision CD texture machining
Direct Assembly
High-Strength TORX PLUS® Drive Precision Screws
The 1.2mm inner-outer thread super screw is designed specifically for thin boards and achieves bidirectional fastening with a precision inner-outer thread structure. Combined with high-hardness alloy material and fine thread rolling
SMT fasteners
PCB Solder Standoffs / Nut Columns
PCB high-current terminal, designed for high-current scenarios and soldered onto the PCB, providing a low-resistance
Anti-loosening
0.6mm CM ultra-thin head micro screw with serrated locking
A 0.6 mm ultra-low head profile greatly reduces the assembly space; a precision serrated structure is integrated under the head.
