spring pins Cylindrical press-in, threadless
Gen-2 Elastic Locating Pin (Short Press-in Type)
Product photos
Actual photos, not renders
The photos show this actual specification; appearance varies with surface treatment and head type — the delivered parts prevail.
Product description
Compiled from the existing technical description of this product on this site
The Gen-2 elastic locating pin is a short press-in structure composed of four parts: steel sleeve, pin, SUS304 spring and rear plug. It is ready to use by pressing directly into the mounting hole — no tapped hole or tapping process required — making it ideal for high-volume automated press-fit lines. The pin tip has a 20°±2° lead angle for automatic centering and reduced scratching during press-in; the spring provides a continuous 10±3N compression force so the pin conforms evenly to the hole wall and compensates machining tolerances of hole position. The pin is made of SUJ2 (GCr15) bearing steel at 50~54HRC, balancing wear resistance and spring life; the sleeve is 42CrMo quenched to 39~44HRC, providing stable guidance for the internal elastic system. Overall height is only 12.25mm, suited to compact small-bearing locating and zero-clearance assembly.
Specifications
Parameters on this page are subject to factory inspection and the applicable standards; items not listed follow the customer's drawing or order agreement, with no default commitment.
| Installation | Cylindrical press-in, threadless |
|---|---|
| Surface treatment | Oiled for rust protection |
| Overall length | 12.25±0.25 mm |
| Sleeve outer diameter | Ø3±0.05 mm |
| Pin diameter | Ø2.65±0.05 mm |
| Pin lead angle | 20°±2° |
| Spring compression force | 10±3 N |
| Pin protrusion after compression | <1.1 mm |
| Sleeve material | 42CrMo, quenched 39~44HRC |
| Pin material | SUJ2（GCr15），50~54HRC |
| Rear plug / spring | 45#（250~320HV） / SUS304 |
Spec lookup
Look up directly among the 4 models of this series by your operating conditions — pure front-end filtering, no redirects, no URL changes.
Filtering results are based on the specification fields published on each model page and serve as a preliminary screen only; final selection must be confirmed against actual load, sheet thickness and assembly process.
Drawings & customization
No public catalog for this series yet; drawing-based requirements are handled per project
Made to drawing / sample replication
Send a 2D drawing or a physical sample for evaluation; after confirmation we proceed with CAD output, prototyping, first-article approval and then volume production. Drawing and project information are treated as confidential.
Manufacturing process
Typical process route for this product category; actual operations follow the drawing and order requirements
- Coil formingStrip material coiled into the spring pin
- Heat treatmentElasticity and hardness control
- Surface treatmentBlack oxide / zinc plated
- Elasticity verificationInsertion and extraction force testing
Capacity & delivery
Based on the company's published capacity and certification information; no unverified claims
Related models
Alternative sizes in the same series and cross-series fasteners commonly used together
spring pins
Elastic Locating Pin
YF Zhichengjia elastic locating pins use an elastic self-locking structure for precise location
spring pins
Gen-1 Elastic Locating Pin (M8 Thread-Mount Type)
M8×1.25 external thread
spring pins
Gen-3 Elastic Locating Pin (Long Press-in Type)
Threadless cylindrical press-in type
Riveting and clinching series
1.2mm ultra-thin clinch nut
1.2mm ultra-thin clinch nut, custom-made for thin sheet metal, hardened alloy steel
Inquiry and technical support
Leave your requirements; engineers will reply item by item against this page's specifications; for volume or drawing-based requests, please note quantity and lead time
